Split system (Single phase and 3-phase type)
Maintenance Document 1544-1 107
6.2.9 RIGHT PANEL removal
6.2.10 REACTOR removal
6.2.11 THERMISTOR removal
HEAT EXCHANGER (MID) THERMISTOR
HEAT EXCHANGER (OUT) THERMISTOR
screw
screw
Screw
with washer
Remove the 11 mounting screws.
Remove the RIGHT PANEL by
sliding upward.
Remove the connectors.
Remove the 3 mounting screws.
Remove the THERMISTOR SPRING.
Remove the THERMISTOR.
3-Phase type
Remove the THERMISTOR SPRING.
Remove the THERMISTOR.