Fujitsu x178 - Technical Fact Sheet

English
18
Technical fact sheet x178
Picture tube
Display area
Operating
conditions
Input signals
Input voltage
Power
management
Power
consumption
■ 17’’ FST, 90
o
deflection,
■ 0.26mm dot pitch invar shadow mask
■ Anti-glare, antistatic multi-layer coated
■ Transmission 46%
■ Phosphor colour P22, medium persistence
■ Maximum area 325mm x 244mm,
diagonal 406.4mm
■ Factory preset area 306mm x 230mm
■ Ambient temperature +0 to +40
o
C (operating),
-40 to +65
o
C (transportation)
■ Relative operating humidity 10 to 80%,
non-condensing
■ Video signal: Analog 0.714 Vpp positive
at 75 ohm
■ Maximum Pixel Clock: 205 MHz
■ Separate sync: TTL Level, positive or negative
■ Composite sync: TTL Level, positive or negative
■ Sync-on-Green: Composite sync 0.286 Vpp
negative (Video 0.714 Vpp positive)
100-240 VAC, 60/50 Hz auto select
VESADPMS 1.0
Operating 120 W (max).
100 W (nominal)
Standby mode < 70W
Suspend mode < 15W
Power-off mode <3 W
Unplugged 0 W
Fujitsu 8/16/92 5:16 PM Page 21