What to do if my Fujitsu Monitor says 'No Video Input Or No Signal'?
If your Fujitsu Monitor displays the message 'No Video Input Or No Signal', first ensure the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
How to fix 'Frequency out of range' error on Fujitsu Monitor?
If your Fujitsu Monitor displays a message such as 'This is 85 Hz overdrive' or 'Frequency out of range', it means the input signal doesn't match the monitor's specifications. Try adjusting the video frequency range using your computer's software or graphics card settings. You can also try using a different screen resolution via your computer's software or screen controller settings.
What to do if my Fujitsu LCD has no display but the power light is on?
If your Fujitsu Monitor screen is blank but the power indicator is lit, check that your computer is switched on. Ensure the monitor's data cable is correctly attached to the computer's monitor port. Try pressing any key on the keyboard, as the computer might be in energy-saving mode. You might also try adjusting the brightness and contrast until a picture appears.
How to adjust brightness on Fujitsu LCD?
If your Fujitsu Monitor's picture is too light or too dark, first try the auto-adjustment function, either with the AUTO button (if available) or through the OSD menu. If the result is not satisfactory, manually adjust the contrast and brightness via the OSD menu.
Why is the picture shaking on my Fujitsu LCD?
If the picture on your Fujitsu Monitor is shaking, first check if the data cable is correctly attached to the monitor port on your computer. If it doesn't help, try the auto-adjustment of the monitor using the AUTO button (if present) or via the OSD menu.
How to adjust the picture position on my Fujitsu Monitor?
If the picture position on your Fujitsu Monitor is not correct, it might be because the monitor recognizes an undefined mode. Try performing the auto-adjustment of the monitor using the AUTO button (if available) or through the OSD menu. If this doesn't solve the problem, set the picture position using the OSD menu.
Why is my Fujitsu LCD not turning on?
If your Fujitsu Monitor displays no screen and the power indicator doesn't light up, check if the monitor is switched on and ensure the power cable is correctly connected. Also, verify that the computer is switched on.
What to do if my Fujitsu LCD Monitor has horizontal lines or picture noise?
If your Fujitsu Monitor is showing picture disturbances in the form of horizontal lines or picture noise, try performing the auto-adjustment of the monitor (with the AUTO button - if present - or via the OSD menu).
What to do if my Fujitsu Monitor has vertical lines?
If your Fujitsu Monitor is showing picture disturbances in the form of vertical lines, try performing the auto-adjustment of the monitor using the AUTO button (if present) or via the OSD menu.
Identifies the intended audience for the manual's operations and safety information.
Explains symbols, fonts, and text formatting used in the manual for clarity.
Refers to external documentation for detailed setup of resolution and refresh rate.
Provides essential safety precautions for operating and handling the monitor to prevent hazards.
Specifies requirements and guidelines for selecting and using power cables for safe operation.
Details how to safely transport the monitor, emphasizing care and proper packaging.
Outlines proper procedures and precautions for cleaning the monitor to avoid damage.
States compliance with relevant EC directives for electromagnetic compatibility and low voltage.
Declares compliance with FCC rules for digital devices and potential radio frequency interference.
Instructs users on verifying package contents and checking for shipping damage.
Details how to connect the data and power cables to the monitor itself.
Explains how to connect the monitor cables to the computer system.
Describes how to adjust the monitor's tilt angle for optimal viewing.
Explains the procedure for turning the monitor and computer system on and off.
Provides solutions for common problems encountered with the monitor display and operation.
Explains pixels, subpixels, and acceptable fault levels per ISO 9241-3 standard.
To Next Page
General