11
• Keep your vacuum clean and in good operating condition.
• Always use genuine replacement parts. Use of other products may result in poor cleaning
performance, potential vacuum cleaner damage and may void the vacuum warranty.
Genuine products are designed for maximum cleaning performance.
• Store your vacuum carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner’s manual instructions.
WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug the
Battery Charger and Remove the Battery Before Servicing or Cleaning the Vacuum.
CAUTION! To Reduce the Risk of Electric Shock, Do Not Handle the Charger or Appliance
with Wet Hands.
PROBLEM
Vacuum won’t turn on�
Vacuum won’t pick up
or low suction�
Insufficient run time
after charging�
POSSIBLE REASON
• Drained battery�
• Uninstalled battery�
• Battery installed
incorrectly�
• The dust cup is full�
• Filter is dirty�
• The neck of the floor
nozzle is blocked or
the brushroll is jammed�
• Insufficient charging time�
• Battery aging�
POSSIBLE SOLUTION
• Charge the vacuum�
• Install the battery�
• Install the battery properly�
• Empty the dust cup�
• Clean or replace filter�
• Clear the debris from the floor
nozzle or brushroll�
• Fully charge the vacuum according to
the instructions described on page 7�
• Replace the battery�
Troubleshooting
For Best Performance
Any other service should be performed at a Fuller Brush service center.
To Next Page
