FT-C Vertical Electric Thermal Fluid Heater Manual 12 2013 ISSUE 1
must be observed to prevent serious
injury or death to personnel.
must be observed to prevent damage
or destruction of equipment or loss of operating
effectiveness.
must be observed for essential and
effective operating procedures, conditions and as
a statement to be highlighted.
It is the responsibility and duty of all personnel
involved in the operation and maintenance of this
equipment to fully understand the
and by which hazards are to be
eliminated or reduced.
Personnel must become familiar with all aspects of
safety and equipment prior to operation or
maintenance of the equipment.
!
!
!
!
Do not try to do repairs or any other maintenance work you
do not understand. Obtain a Service Manual from
Fulton Ltd or call a Fulton Service Engineer.
It is the responsibility of the installer to ensure all parts
supplied with the boiler are tted in a correct and safe manner.
The instructions provided for the operation and maintenance of the system MUST be observed.
Failure to do so could result in damage to the boiler and serious personal injury.
!
Prior to shipment, the following tests are made to assure the customer the highest standards of manufacturing:
a) Material inspections
b) Manufacturing process inspections
c) ASME welding inspection
d) ASME hydrostatic test inspection
e) Electrical components inspection
f) Operating test
g) Final engineering inspection
h) Crating inspection
Rigging your heater into position should be handled by a competent rigger experienced in handling heavy
equipment.
The customer should examine the heater for any damage, especially the refractories.
!
Understand the electrical circuit before connecting or
disconnecting an electrical component. A wrong connection
can cause injury and or damage.
A defective heater can injure you or others. Do not operate
a which is defective or has missing parts. Make sure
that all maintenance procedures are completed before using
the system. Do not attempt repairs or any other maintenance
work you do not understand. Obtain a Service Manual from
Fulton or call a Fulton Service Engineer.
!
!
- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
• Immediately call your gas supplier from a neighbor’s
phone. Follow the gas
supplier’s instructions.
• If you cannot reach your gas supplier, call the re de-
partment.
!
To Next Page
Loading...
