To Next PageTo Next PageWhy is there no audio signal from the loudspeakers of the audio system with FUNAI B4-M500?
If you're not getting any audio signal from the loudspeakers of the audio system connected to your FUNAI Blu-ray Player, check that the audio system is turned on, set to the correct external audio input, and the volume level is appropriately increased.
What to do if my FUNAI B4-M500 unit does not respond to the remote control?
If your FUNAI Blu-ray Player unit isn't responding to the remote control, aim the remote control directly at the infrared sensor window on the front panel. Reduce the distance to the infrared sensor window. Check the + / – polarity of the batteries and replace both batteries in the remote control if required.
What to do if my FUNAI Blu-ray Player has no power?
If your FUNAI Blu-ray Player isn't turning on, first, ensure the AC adapter is properly connected. If it is, try unplugging the adapter, waiting 5-10 seconds, and then plugging it back in.
Why my FUNAI B4-M500 Blu-ray Player has no sound or picture?
If your FUNAI Blu-ray Player isn't displaying any sound or picture, verify that the connected TV is powered on and the connections are secure and correct. Check if the connected TV or device supports HDCP, as the unit requires HDCP support to output a video signal. Also, ensure the unit's output format (HDMI FORMAT) matches the supported input format of the connected device. As a last resort, touch and hold [B (play)] on the front panel for 5 seconds to revert the settings to default.
What to do if my FUNAI Blu-ray Player cannot remove the disc?
If your FUNAI Blu-ray Player won't eject the disc, try pressing and holding [EJECT A] for more than 5 seconds. If that doesn't work, unplug the AC adapter, plug it back in, and then press [EJECT A] again.
How to fix no audio / video signal on FUNAI B4-M500 Blu-ray Player via HDMI cable?
If you're not getting any audio or video signal on your display device via HDMI cable with your FUNAI Blu-ray Player, it might be due to an unauthorized display device. Try performing an HDMI cable hotplug: disconnect the HDMI cable from both the TV and the unit, then reconnect it while both devices are powered on. Also, ensure your HDMI cable is certified.
What to do if buttons do not work on FUNAI B4-M500 Blu-ray Player or the unit stops responding?
If the buttons on your FUNAI Blu-ray Player do not work or the unit stops responding, completely reset the unit. Touch and hold [Q (standby/on)] on the front panel for 10 seconds to shut down the unit or unplug the AC adapter from the AC outlet for 5 - 10 seconds.
Why FUNAI B4-M500 Blu-ray Player does not respond to some operating commands during playback?
If your FUNAI Blu-ray Player does not respond to some operating commands during playback, it may be because those operations are not permitted by the disc. Refer to the disc's instructions.
Why do I get completely distorted picture or black / white picture with FUNAI B4-M500?
If you're experiencing a completely distorted or black and white picture with your FUNAI Blu-ray Player, ensure that the disc is Region compatible or otherwise compatible with your unit.
Why there is no 3D video on the TV screen when playing with FUNAI B4-M500 Blu-ray Player?
If you're not seeing 3D video on your TV screen with your FUNAI Blu-ray Player, verify that your TV is 3D capable and use a 3D compatible HDMI cable. Also, check the battery levels of your glasses, ensure they are switched on and synced with your TV.
General| Video Output | HDMI |
|---|---|
| Ethernet | Yes |
| USB Port | Yes |
| Resolution | 1080p |
| Playable Media | Blu-ray, DVD, CD |
