To Next PageTo Next PageWhat to do if my FUNAI B4-M500 remote control is not working?
If the remote control isn't working with your FUNAI Blu-ray Player: * Ensure the unit is connected to a power outlet. * Point the remote control directly at the unit. * Check that the batteries are inserted with the correct polarity. * Try inserting new batteries.
Why is there no high-definition video signal on my FUNAI B4-M500 Blu-ray Player?
If you're not getting a high-definition video signal on your TV screen from your FUNAI Blu-ray Player, make sure the disc contains high-definition video and that your TV supports high-definition video.
How to fix FUNAI B4-M500 that cannot connect to the network?
If your FUNAI Blu-ray Player is unable to connect to the network, check the following: * Ensure the network connection is properly made. * Turn on the modem or router. * Check the network settings. * Verify the router and/or modem are correctly connected. * Check the BD-Live™ setting in “Manual” setup. * If connecting directly to a modem via a LAN cable, power cycle the modem to reset its settings.
How to fix FUNAI Blu-ray Player no sound or distorted sound?
If you are experiencing no sound or distorted sound with your FUNAI Blu-ray Player, try these steps: * Adjust the volume. * Check if the speakers are connected correctly. * Check the HDMI connections. * Check the settings in the “Audio Out” menu.
How to fix no audio / video signal on FUNAI B4-M500 Blu-ray Player via HDMI cable?
If you're not getting any audio or video signal on your display device via HDMI cable with your FUNAI Blu-ray Player, it might be due to an unauthorized display device. Try performing an HDMI cable hotplug: disconnect the HDMI cable from both the TV and the unit, then reconnect it while both devices are powered on. Also, ensure your HDMI cable is certified.
What to do if my FUNAI Blu-ray Player cannot remove the disc?
If your FUNAI Blu-ray Player won't eject the disc, try pressing and holding [EJECT A] for more than 5 seconds. If that doesn't work, unplug the AC adapter, plug it back in, and then press [EJECT A] again.
Why my FUNAI B4-M500 Blu-ray Player has no sound or picture?
If your FUNAI Blu-ray Player isn't displaying any sound or picture, verify that the connected TV is powered on and the connections are secure and correct. Check if the connected TV or device supports HDCP, as the unit requires HDCP support to output a video signal. Also, ensure the unit's output format (HDMI FORMAT) matches the supported input format of the connected device. As a last resort, touch and hold [B (play)] on the front panel for 5 seconds to revert the settings to default.
What to do if my FUNAI Blu-ray Player has no power?
If your FUNAI Blu-ray Player isn't turning on, first, ensure the AC adapter is properly connected. If it is, try unplugging the adapter, waiting 5-10 seconds, and then plugging it back in.
What to do if my FUNAI B4-M500 unit does not respond to the remote control?
If your FUNAI Blu-ray Player unit isn't responding to the remote control, aim the remote control directly at the infrared sensor window on the front panel. Reduce the distance to the infrared sensor window. Check the + / – polarity of the batteries and replace both batteries in the remote control if required.
General| Video Output | HDMI |
|---|---|
| Ethernet | Yes |
| USB Port | Yes |
| Resolution | 1080p |
| Playable Media | Blu-ray, DVD, CD |
