EN - 38
10.4. Software Update
This unit lets you update the software yourself using a software update disc, USB Memory Stick.
The available discs are below:
- BD-RE/-R
- DVD-RW/-R
- CD-RW/-R
Disc / USB Memory Stick Update
You can update the software by using a disc or USB Memory Stick.
Prepare a blank disc or USB Memory Stick for software update:
Access
, and download the latest version software to a blank disc or USB Memory Stick using a PC
by following the directions described on the website.
• Use a blank disc or USB Memory Stick, download one software per disc or USB Memory Stick. Write the software in
the root directory of the disc or USB Memory Stick.
• For more details on how to download the software, please refer to the website.
1. Use [] to select “Settings” in the Home Menu, then press [OK].
2. Use [] to select “Others”, then press [OK].
3. Use [] to select “Software Update”, then press [OK].
4. Use [] to select “Disc” or “USB Memory Stick”, then press [OK].
5. Use [] to select “Yes”, then press [OK].
6. Insert the disc or connect the USB Memory Stick for software update.
7. After loading disc or USB Memory Stick, confirmation message will appear. Select “Yes” and press [OK].
8. The unit will restart automatically, then software update will start.
• It may take a while to complete the updating.
9. After the update finishes, this unit will restart. Remove the disc or the USB Memory Stick from the unit.
C Caution
• Please do not unplug the AC power cord, eject the disc or disconnect the USB Memory Stick or press
[(POWER-ON)] to turn the unit to Standby mode while performing a “Disc / USB Memory Stick Update”.
D Note
• Software update will not change any of the current settings.
HOME A “Settings” A “Others” A “Software Update”
To Next Page
Loading...
