1. Introduction
1.1.working with the manual
Field Interactive fields on the touch screen are
marked like the example on the left
fat Special hints are marked fat.
2. Security precautions
a) For your protection
The device must not be used in hazardous environments; it is
not gas-tight (danger from the formation of sparks, corrosion
due to the entry of gases)
Always adhere to hazard warnings and safety tips when using
reagents, chemicals and cleaning agents.
b) Measures to the working safety
The device should not be opened as live parts might be exposed. If in exceptional cases
the device has to be opened, remove the mains plug from the socket before opening the
device!
Under no circumstances should you expose the device to the following:
• Direct sunlight
• High humidity (above 80%)
• Strong electric or magnetic fields
• Strong vibrations
• Corrosive gases or liquids
• Temperatures below 5°C and above 40°C
4
To Next Page
Loading...
