Funkey BELL 222 - Attach Horizontal Stabilizers to Fuselage; Mount Tail Hatch; Assemble Tail Fin Components; Mount Vertical Tail Fin

* "GOOP" IS A BRAND OF GLUE WHICH IS MANUFACTURED BY
ECLECTIC PRODUCTS, INC.
IT IS AVAILABLE IN MOST HARDWARE STORES.
CUT WINDSHIELD AND WINDOWS AS MARKED.
GLUE IN PLACE WITH SILICONE OR "GOOP" *.
INSERT TAIL BOOM INTO SPONGE RING
ENGINE SIZE:60
90
90
ALIGN HORIZONTAL STABS. TO FUSELAGE AS SHOWN.
10
12
14
16
9
11
13
15
GLUE 1.5x10x10 MM PLYWOOD.
MOUNT TAIL HATCH WITH M3x6
ROUND HEAD TAPPING SCREW.
GLUE CLEAR LIGHT, ALUM. HOLDER
AND STEEL WIRE IN THE TAIL FIN.
MOUNT THE VERTICAL FIN WITH
M3x16 ROUND SOCKET HEAD SCREWS,
3x8x0.7 WASHERS AND LOCKNUTS.
GLUE RED LIGHT ON TOP OF HATCH AND BOTTOM
OF FUSELAGE.
P.2
SIDE WINDOWS ARE
GLUED INSIDE FUSELAGE
BELL 222
GENERAL INSTALLATION MANUAL