Funkey BELL 222 User Manual

BELL 222
ENGINE SIZE:60
GENERAL INSTALLATION MANUAL
158mm
SAND AREA AS INDICATED BY ARROW ON THE FRONT PORTION WITH
#180 SAND PAPER. GLUE TAIL SECTION WITH 30MIN. EPOXY AND SET
TAIL HEIGHT AS SHOWN WITH INCLUDED PLYWOOD INDICATOR.
TAIL ATTACHMENT INSTRUCTION

Funkey BELL 222 Specifications

General

Brand	Funkey
Model	BELL 222
Category	Toy
Language	English

Summary

General Installation

Cut Hatch Slots and Glue Brackets

Cut 2.5x11mm slots in hatch, glue brackets inside.

Glue Mesh and Align Top Hatch

Cut mesh, glue inside fuselage and top hatch. Glue plywood/poles for alignment.

Glue Fuselage Plywood and Drill Holes

Glue Tail Fins to Horizontal Stabilizer

Assemble and Align Horizontal Stabilizers

Attach Horizontal Stabilizers to Fuselage

Mount Tail Hatch

Assemble Tail Fin Components

Mount Vertical Tail Fin

Install Windshield and Windows

Insert Tail Boom into Ring

Retractable Landing Gear Installation

Nose Gear Servo Connection

Connect ball link and push rod to nose gear servo.

Install Nose Wheel

Install nose wheel (45mm).

Mount Main Gear Servo Tray

Mount servo tray with M3x12 socket head tapping screw.

Main Gear Servo Connection

Connect ball link and push rod to main gear servo.

Century Predator Mechanism Installation

Century Predator Preparation and Holes

Mount Predator Mechanism in Fuselage

Mount mechanism in fuselage with shaped hardwood.

Hirobo Freya Mechanism Installation

Hirobo Freya Preparation and Holes

Prepare Hirobo Freya Mounting Plate

Mount Freya Mechanism in Fuselage

Mount mechanism in fuselage with sanded mounting plate inverted.

Thunder Tiger Raptor Mechanism Installation

Raptor Mechanism Preparation and Holes

Prepare Raptor Mounting Plate

Mount Raptor Mechanism in Fuselage

Mount mechanism in fuselage with sanded mounting plate inverted.

Install Plywood and Mounting Plate

Glue plywood, install alum. mounting plate with screws.

Cut Swatch Plate and Probe Holes

Cut Tail Hatch for Gear-Box