Funkwerk bintec R230a Technical Data

Technical Data bintec User’s Guide 25
3
Pin Assignments
Table 3-4: RJ45 socket for LAN connections
The Ethernet sockets are not equipped with Auto-MDIX technology.
3.5.3 ADSL Interface
The ADSL interface is connected using a RJ11 socket. The supplied cable
combines the RJ45 plug required by most ADSL splitters and the RJ11
plug required by the gateway.
Only the inner pins are used for the ADSL connection:
Figure 3-5: ADSL interface (RJ11)
The ADSL interface has the following pin assignment:
2 TD -
3 RD +
4 Not used
5 Not used
6 RD -
7 Not used
8 Not used
Pin Function
1 Not used
Pin Function

Funkwerk bintec R230a Specifications

General

Brand	Funkwerk
Model	bintec R230a
Category	Gateway
Language	English