Quick Install Guide bintec User’s Guide
17
Configuration
3
The installed programs are available for use immediately after the installation of
BRICKware. It is not usually necessary to restart the PC.
3.2 Configuring the Gateway
Your gateway can be configured quickly and easily with the HTML Wizard.
The configuration of your gateway is started as follows:
1. Select Installation on the funkwerk Companion CD and click the button
Configure Gateway.
2. Note the information on how to determine a free IP address for your gate-
way in the network. Click Assign automatically... or enter your defined IP
address and netmask.
3. Start the configuration with Finish.
Note
If you have already created a configuration with the Wizard, the Wizard can
use the preset values. You are informed about this possibility during configura-
tion.
quick_reference.book Page 17 Tuesday, April 4, 2006 9:26 AM
To Next Page
Loading...
Need help?
General
