To Next PageTo Next PageWhat to do if Furrion Automobile Accessories camera and monitor won’t pair?
If your Furrion Automobile Accessories camera and monitor are not pairing, verify that the camera is receiving power. Also, ensure you hold the camera pairing button for 2 seconds.
What to do if Furrion FOS43TASF has intermittent or weak signal?
If you see an intermittent or weak signal icon on your Furrion Digital Camera, first check that the camera antenna is correctly fitted and secured vertically. Large, dense objects may be obscuring the signal, so try moving them if possible. Electrical appliances might also cause interference, so turn them off while using the system. Unpairing and then pairing the devices again can also help.
Why won't my Furrion FOS43TASF Digital Camera pair?
If your Furrion monitor or rearview mirror won't pair with the wireless camera, remember that Furrion products can only pair with other Furrion cameras. Check that the camera is getting power and that the fuse on the connected power line gives an extra 1A of fusing current. Make sure all bare cable ends are properly isolated to prevent short circuits. Also, ensure you press and hold the camera pairing button for 2 seconds.
What to do if the Furrion FOS43TASF signal is weak?
If you're seeing an intermittent or weak signal icon on your Furrion Digital Camera, here are a few things to try: * Make sure the camera antenna is properly fitted and secured in a vertical position. * Reduce the distance between the camera and the monitor. * Move any large, dense objects that might be blocking the signal. * Turn off any nearby electrical appliances that could be causing interference. * Consider that interference from overhead power lines may be affecting the signal. * Try unpairing and pairing the devices again.
How to fix Furrion FOS43TASF monitor if it won’t turn on?
If your Furrion Digital Camera monitor isn't turning on and the blue LED is off, check these things: * Ensure the power cable is securely connected. * Verify that the cigarette lighter socket provides a 12-24V DC output. * Inspect the fuse in the cigarette socket adapter and replace it if necessary.
Why won't my Furrion Digital Camera and monitor pair?
If your Furrion Digital Camera and monitor aren't pairing, try these steps: * First, check that the camera is receiving power. * Second, ensure you are holding the camera pairing button for a full 2 seconds.
Why is Furrion FOS43TASF Digital Camera monitor's blue LED off with no picture?
If your Furrion Digital Camera monitor's blue LED is off and there's no picture, make sure the camera has power. Ensure the tow vehicle is running and that the 7-way connector is properly connected.
Why Furrion Automobile Accessories monitor blue LED is not lit and there is no picture?
If your Furrion Automobile Accessories monitor's blue LED is not lit and there is no picture, it could be due to the camera not receiving power. Make sure the tow vehicle is running, the 7-way connector is connected, and the circuit the camera is connected to has power.
How to fix Furrion Automobile Accessories monitor if it won’t turn on?
If your Furrion Automobile Accessories monitor isn't turning on (no blue LED), try the following: 1. Ensure the power cable is properly connected. 2. Verify the cigarette lighter provides a 12-24V DC output. 3. Check the fuse in the cigarette socket adapter.
What causes a Furrion FOS43TASF monitor's Blue LED to be off with no picture?
If the Furrion Digital Camera monitor's blue LED is off and there is no picture, ensure the tow vehicle is running. Also, ensure the 7-way connector is connected.
General| Waterproof | Yes |
|---|---|
| Night Vision | Yes |
| Type | Wireless |
| Camera Resolution | 720P |
| Screen Size | 4.3 inches |
