Furuno ECDIS FMD-3200 User Manual

www.furuno.com
A
ll brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
ECDIS
Model FMD-3200/FMD-3300/FMD-3200-BB
(ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM)
SAFETY INSTRUCTIONS ................................................................................................ i
SYSTEM CONFIGURATION ........................................................................................... ii
EQUIPMENT LISTS......................................................................................................... v
1. MOUNTING..............................................................................................................1-1
1.1 Monitor Unit........................................................................................................................1-1
1.2 ECDIS Control Unit/Track Control Unit..............................................................................1-1
1.3 Processor Unit ...................................................................................................................1-4
1.4 Sensor Adapters (option)...................................................................................................1-6
1.5 Intelligent HUB (option)......................................................................................................1-7
1.6 Switching HUB (option)......................................................................................................1-8
1.7 Radar Connection Box (option)..........................................................................................1-8
2. WIRING....................................................................................................................2-1
2.1 Processor Unit ...................................................................................................................2-3
2.2 Monitor Unit......................................................................................................................2-13
2.3 Sensor Adapters (option).................................................................................................2-15
2.4 Intelligent HUB (option)....................................................................................................2-32
2.5 How to Extend the Control Unit Cable (option) ................................................................2-33
2.6 Radar Connection Box (option)........................................................................................2-37
2.7 Raytheon Anschutz Autopilot NP-5400............................................................................2-41
3. ECN-303/304 (OPTION) ..........................................................................................3-1
3.1 How to Install the Console .................................................................................................3-1
3.2 How to Dismount the Rack for the Processor Unit.............................................................3-2
3.3 How to Connect External Cables.......................................................................................3-4
3.4 How to Mount the Rack for the Processor Unit..................................................................3-6
4. SETTING UP THE EQUIPMENT .............................................................................4-1
APPENDIX 1JIS CABLE GUIDE...............................................................................AP-1
APPENDIX 2ROD TERMINALS................................................................................AP-2
APPENDIX 3RA/IF BOARD JUMPER VALUES.......................................................AP-8
APPENDIX 4ALERT LIST .........................................................................................AP-9
PACKING LIST(S) ....................................................................................................... A-1
OUTLINE DRAWING(S) .............................................................................................. D-1
INTERCONNECTION DIAGRAM(S) ........................................................................... S-1

Furuno ECDIS FMD-3200 Specifications

General

Brand	Furuno
Model	ECDIS FMD-3200
Category	Monitor
Language	English

Summary

Safety Instructions

System Configuration

Equipment Lists

Mounting

Monitor Unit

Instructions for mounting the monitor unit.

ECDIS Control Unit/Track Control Unit

Mounting the ECDIS Control Unit or Trackball Control Unit.

Processor Unit

Mounting considerations and procedures for the processor unit.

Sensor Adapters (option)

Mounting considerations and procedures for optional sensor adapters.

Intelligent HUB (option)

Mounting considerations and procedures for the optional Intelligent HUB.

Switching HUB (option)

Mounting considerations for the optional Switching HUB.

Radar Connection Box (option)

Mounting considerations for the optional Radar Connection Box.

Wiring

Processor Unit

Connecting cables to the processor unit terminals.

Monitor Unit

Wiring considerations for connecting monitor units to the ECDIS.

Sensor Adapters (option)

Detailed wiring and jumper settings for sensor adapters.

How to Extend the Control Unit Cable (option)

Procedures for extending control unit cables.

Radar Connection Box (option)

Connecting LAN cables to the Radar Connection Box.

Raytheon Anschutz Autopilot NP-5400

Interconnection diagram and notes for connecting the autopilot.

ECN-303/304 (OPTION)

How to Install the Console

Step-by-step instructions for installing the display unit console.

How to Dismount the Rack for the Processor Unit

Procedures for removing the processor unit rack from the console.

How to Connect External Cables

Steps for connecting external cables to the terminal board.

How to Mount the Rack for the Processor Unit

Procedures for remounting the processor unit rack into the console.

Setting Up the Equipment

Appendix 1 JIS Cable Guide

Appendix 2 Rod Terminals

Appendix 4 Alert List