Installation Manual
MARINE RADAR
Model
FAR-2218(-BB)/2228(-BB/-NXT/-NXT-BB)/
FAR-2318/2328(-NXT)/FAR-2238S(-BB/-NXT/-NXT-BB)/
FAR-2338S(-NXT)/2328W/2338SW/2258/2268DS
FAR-2018-MARK-2/2028-MARK-2
SAFETY INSTRUCTIONS ........................i
SYSTEM CONFIGURATION ..................iv
EQUIPMENT LISTS..............................xvi
1. INSTALLATION...............................1-1
1.1 Antenna Unit (X-band Radar) .............1-1
1.2 Antenna Unit (S-band Radar) ...........1-14
1.3 Monitor Unit.......................................1-23
1.4 Control Unit .......................................1-23
1.5 Power Supply Unit ............................1-30
1.6 Processor Unit ..................................1-31
1.7 Transceiver Unit................................1-32
1.8 Intelligent Hub (option)......................1-33
1.9 Switching Hub (option)......................1-34
1.10 Junction Box (option) ........................1-34
2. WIRING............................................2-1
2.1 Overview .............................................2-1
2.2 Antenna Unit (X-band, TR-UP) ...........2-6
2.3 Antenna Unit (X-band, TR-DOWN)...2-23
2.4 Antenna Unit (S-band, TR-UP) .........2-30
2.5 Antenna Unit (S-band, TR-DOWN)...2-41
2.6 Power Supply Unit ............................2-46
2.7 Transceiver Unit................................2-54
2.8 Processor Unit ..................................2-60
2.9 Monitor Unit.......................................2-66
2.10 LAN Signal Converter .......................2-68
2.11 Junction Box (option) ........................2-71
2.12 Intelligent HUB (option).....................2-72
2.13 VDR Connection ...............................2-72
3. ADJUSTMENTS ..............................3-1
3.1 Radar Installation Menu ......................3-3
3.2 How to Align the Heading ...................3-3
3.3 How to Adjust the Sweep Timing ........3-4
3.4 How to Suppress Main Bang ..............3-5
3.5 Other Settings .....................................3-5
3.6 How to Control Charts.......................3-27
4. INPUT/OUTPUT DATA ...................4-1
4.1 Processor Unit ....................................4-1
4.2 Sub Monitor.........................................4-3
APPX. 1 JIS CABLE GUIDE............AP-1
APPX. 2 DIGITAL INTERFACE.......AP-2
APPX. 3 ALERT LIST ....................AP-15
PACKING LIST(S)............................... A-1
OUTLINE DRAWING(S)...................... D-1
INTERCONNECTION DIAGRAM(S) ... S-1
To Next Page
Need help?
General
