2
7
VECTOR TIME
key Change the vector time.
VECTOR MODE
key - Sets the positive/negative value to “-”.
- Toggle between true and relative vectors.
TARGET LIST
key Shows/hides the TT/AIS target list.
CANCEL TRAILS
key
Without the menu open:
- Short press: Change the trail display time.
- Long press: Erase displayed trails.
With the menu open:
- Go back one level in the menu. Closes the menu if the top level is displayed.
- Cancel changes made to a menu setting.
BRILL
key Change the color scheme.
ENTER MARK
key
Inside the Operational Display Area (ODA):
Inscribes a mark.
With the menu open:
Confirm changes, open the selected menu.
8
MENU
key Open/close the menu.
9
RANGE
controls Increase/decrease the display range.
10
ACQ
key Manually acquire the cursor-highlighted target for Target Tracking (TT).
TARGET DATA
key - Show the information for the cursor-highlighted target.
- Activate a sleeping AIS target.
TARGET CANCEL
key - Cancel tracking for the selected target.
- Sleep the selected AIS target.
- Long press: Cancel tracking for all TT targets.
- Delete marks/waypoints (C-types only).
- Cancel character input*.
11 Right mouse button Short press:
• Show the pop up menu for the highlighted item.
• Cancel changes to the currently selected setting.
• With pop up menus shown: Hide pop up menus.
Long press:
• Change the screen brilliance to [50].
12 Scrollwheel • Change settings.
• Highlight a menu item.
13 Left mouse button Select a highlighted object or menu item.
14 Trackball
For IMO-types
• Moves the cursor.
• Highlight an object
or menu item.
For C-types
• Moves the cursor (when the cursor is shown).
• Moves the chart (when the cursor is hidden).
• Highlight an object or menu item.
No. Key/Control Description
To Next Page
Loading...
Need help?
General
