To Next PageTo Next Page
Need help?Do you have a question about the Furuno FAR-2827W and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Radar Type | X-band |
| Power Supply | 24 V DC |
| Frequency | 9410 MHz |
| Rotation Speed | 24 rpm |
Provides critical usage guidelines for authorized service technicians, emphasizing confidentiality.
Provides step-by-step instructions for performing the radar modification.
Lists eliminated problems and changes for SPU software version 2.22.
Outlines the procedure for replacing the DVI I/F board in the monitor.
Describes the symptom of a black area appearing on both sides of the screen.
Provides the simple remedy of setting S1 on the SPU board to the ON position.
Provides a general introduction to the system components and their functions.
Details the system configuration, including tables for components and connections.
Describes the RPU-013 processor unit, its common usage, and differing boards.
Details the RPU-013 processor unit, including its bottom and top views.
Details the initialization settings for various system parameters.
Lists the program files for the SPU and RFC boards, including file names and sizes.
Outlines the necessary steps before updating programs, including checking numbers and PC connection.
Details the procedure for updating the radar programs.
Explains the process of updating programs using a Mini-program card.
Describes how to perform self-tests for various system components.
Explains the purpose and items covered by the self-test function.
Covers the factory test procedures, including ROM/RAM checks and SIO checks.
Explains the purpose and scope of the factory test.
Lists and explains various error messages that can appear on the ALERT BOX.
Details common error messages and their potential causes or remedies.
Presents a block diagram showing the overall system architecture.
Details the components and functions of the antenna unit.
Describes the RFC board's role in controlling other units and processing signals.
Details automatic and manual tuning operations for optimal performance.
Explains the automatic STC function for controlling sea clutter and signal levels.
Describes the RPU-013 processor unit and its main boards.
Provides a general overview of the processor unit and its components.
Describes the SPU board's functions, including picture processing and CPU components.
