How to reduce noise and interference on Furuno Marine Equipment?
To address noise and interference, ensure that the GAIN and CLUTTER settings are properly adjusted. Also, check the setting of the noise limiter and verify the equipment’s ground.
What to do if there is no depth readout on my Furuno Marine Equipment?
If there is no depth readout, first check to see if the bottom is present on the normal picture range. Also, verify if the bottom echo is strong enough, meaning it should appear red or reddish brown in color.
How to improve low sensitivity on Furuno Marine Equipment?
If you suspect low sensitivity, check that the gain control is properly set.
Why is the bottom traced in a zigzag pattern on my Furuno Marine Equipment?
The bottom is traced in a zigzag pattern when the sea is rough. This can also occur if your boat has passed over another boat’s wake, which blocks the propagation of the sound wave.
General| Display Size | 12.1 inches |
|---|---|
| Frequency | 50/200 kHz |
| Waterproof Rating | IPX6 |
| Power Supply | 12/24 V DC |
| Operating Temperature | -15°C to +55°C |
| Category | Fish Finder |
| Display Type | Color LCD |
| Resolution | 800 x 600 pixels |
| Power Output | 1 kW |
| Depth Range | Up to 1000 meters |
Covers electrical shock hazards and warnings related to opening equipment.
Warns about keeping heaters away from the equipment to prevent damage.
Emphasizes using the correct fuse rating to avoid damage or fire.
Details the keys and controls for the portrait-type control unit.
Details the keys and controls for the landscape-type control unit.
Outlines regular maintenance checks for optimal performance and longevity.
Offers simple procedures to diagnose and resolve common operational issues.
Lists technical specifications related to the echo sounder function.
Details specifications for the LCD display unit, including resolution and color.
To Next Page
