Need help?Do you have a question about the Furuno FCV-800 and is the answer not in the manual?
General| Display Size | 8.4 inches |
|---|---|
| Power Output | 600 W |
| Frequency | 50/200 kHz |
| Operating Temperature | -15°C to +55°C |
| Display Type | LCD |
| Depth Capability/Range | Up to 1000 meters |
| Power Supply | 12 V DC |
Precautions against electrical shock, unauthorized modification, and proper fuse usage.
Guidelines for safe operation, including transducer usage and LCD panel care.
Detailed description of all controls on the front and back of the unit.
Introduction to the basic display modes available on the fish finder.
Guide to automatic and manual gain adjustment for clear signal visibility.
Detailed procedure for accessing and operating the fish finder's menu system.
Steps to activate ACCU-FISH™ and configure its display parameters.
How to activate and configure the bottom discrimination display for seabed analysis.
Improving sonar echo resolution for clearer fish detection with RezBoost™.
Setting up and managing various fish and navigation alarms for alerts.
Procedures for registering, editing, and navigating using waypoints.
Instructions for setting up wireless LAN for device connectivity and data sharing.
Using ACCU-FISH™ to measure fish length and display size-proportional symbols.
Recommended monthly checks for optimal performance and longevity of the unit.
Procedures for replacing fuses and understanding battery voltage warning indicators.
A guide to diagnosing and resolving common problems encountered during operation.
Steps to run diagnostic tests to identify potential causes of unit malfunction.
How to reset the unit's settings to their original factory defaults.
To Next Page
