Need help?Do you have a question about the Furuno FR-1510D and is the answer not in the manual?
General| Category | Marine Radar |
|---|---|
| Display Size | 10.4 inches |
| Power Output | 4 kW |
| Range | Up to 48 nautical miles |
| Antenna Type | Open array |
| Transmitter Power | 4 kW |
| Antenna Rotation Speed | 24 RPM |
| Radar Output Power | 4 kW |
| Type | X-band |
| Frequency | 9410 MHz (X-band) |
Covers initial power-on and basic operational steps.
Explains how to select different operating modes.
Describes the Head-Up display mode and its usage.
Details the North-Up display mode and its application.
Explains the Course-Up display mode and its benefits.
Methods for measuring target ranges and bearings.
How to measure target bearings using EBL.
How to plot target movements and predict courses.
How to set guard zone and alarm functions.
How radar resolution affects target separation.
Defines bearing resolution and its determinants.
Explains range resolution and its relationship to pulse length.
Covers methods for measuring target ranges.
Methods for determining the vessel's position using radar.
Using radar range measurements for position fixing.
Using range and bearing for position fixing.
How to fix position using two radar bearings.
Procedures for maintaining the scanner unit, including checks and cleaning.
Instructions for installing the scanner unit.
Steps for mounting and connecting the scanner unit.
Securing the scanner housing at the installation site.
Instructions for installing the display unit.
Factors to consider when placing the display unit.
Methods for mounting the display unit.
Instructions for tabletop mounting of the display unit.
Connecting the multicore cable between units.
Installing and connecting the rectifier unit.
To Next Page
