7. NBDP SYSTEM OVERVIEW
7-8
Function key F5: [Station] menu
The [Station] menu provides for storage of stations, timer program setup, user channel
setup, and entry of various ID codes.
Function key F6: [System] menu
The [System] menu is mainly for use by technicians and contains diagnostic tests. To
change settings, select [Change] from the item [Setup] and operate the arrow keys to
select item and option. Press the Enter key to register the selection and close the
menu.
1: Register stations.
2: Register timer programs.
3: Register scan groups for scanning.
4: Register user channels.
5: Register own ship's answerback code.
6: Register own ship's group ID code (4 or 5 dig-
its).
7: Register own ship's group ID code (9 digits).
8: Register own ship's selective ID code (4 or 5
digits).
9: Register own ship's selective ID code (9 dig-
its).
Note: For IB-585, the numbers after 5 are
moved up.
1: Station Entry
2: Timer Operation Entry
3: Scan Entry
4: User Channel Entry*
5: Answerback Code Entry
6: Group ID Entry (4/5 digit)
7: Group ID Entry (9 digit)
8: Select ID Entry (4/5 digit)
9: Select ID Entry (9 digit)
Station
*: Only for IB-583
Setup
Slave Delay
TX/RX MSG Save
Edit before Sending
TX Power*
1
Header/Footer*
1
Time System
Date & Time*
2
Window Color
Self Test
Lock Change Default
12 msec (10 - 50 msec)
OFF ON
OFF ON
HIGH MID LOW
OFF ON
OFF UTC SMT JST
10-Apr-2012 10:00:00
System
Each option underlined is the
default setting.
*1: Only for IB-585
*2: [Time & Date] for IB-583
To Next Page
Loading...
