EasyManua.ls Logo

Furuno FS-1575 - Editing;Deleting Stations

Furuno FS-1575
191 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8. NBDP PREPARATIONS
8-4
2. If [Create] is not underlined, press the , and Enter keys to underline it.
3. With [Station] selected, enter station name using up to 18 characters.
4. Press the key to select [ID Code]. Enter station ID code.
5. Press the key to select [Mode]. Select either communication mode with the
or keys.
[ARQ]: Automatic Retransmission Request
[FEC]: Forward Error Correction
6. Press the key to select [CH/Table]. Select [Channel] or [ScanTable].
7. Press the key to select [Num/Table].
If you selected [Channel] at step 6
, enter ITU channel number (see Appendix 2)
or User channel number. Go to step 10.
If you selected [ScanTable] at step 6
, press the key to show the scan group list
registered. For the scan group, refer to section 8.5.
8. Select a scan group name by using the or key then press the Enter key. For
IB-583, go to step 10. For IB-585, go to the next step.
Example window for Scanning Group List
9. Press the key to select [Rephasing]. Select [ON] or [OFF].
Note: The default setting is [ON]. Select [ON] under normal use.
10. Press the Enter key. The prompt [OK/Cancel] asks for verification of data.
11. If the data is correct, press the Enter key. (To cancel entry, press the key to se-
lect [Cancel] then press the Enter key. Data entered are erased.) The station
name entered at step 3 appears at the [Station List] window.
12. To register other stations, press the Enter key twice then repeat steps 3 through
10.
13. Press the key. Check data on the [Station List] for correctness. The stations dis-
played in reverse video on the [Station List] are displayed on [Station Set Up].
14. Press the Esc key to quit.
Note 1: If you enter a station which already exists, the indication "Station by that name
already exists. Press any key to escape." appears. Press any key to return to the [Sta-
tion List]. Check the list.
Note 2: The station entry beginning with "DSC" is special entry which is automatically
registered by DSC function.
Scanning Group List
INTREPID
VOYAGER
GLOBAL
O K
Cancel

Table of Contents

Other manuals for Furuno FS-1575

Related product manuals