Furuno FS-1575 - FEC Mode Operation

10. NBDP TRANSMISSION, RECEPTION
10-14
3. Prepare the macrofile. Below is a simple example.
Sample macrofile for store-and-forward method
4. Press the function key F1 to open the [File] menu.
5. Press the 3 key. The [Close Text] appears.
6. Press the Enter key then enter a file name as follows:
7. Press the Enter key.
< [1] UNTITLED1 >
@FREE $RRR$
@CALL S:LYNGBY RADIO
@WRU
@CASE GA+?
@SEND TLX80212345+
@CASE MSG+?
@SEND
A: \ABC
@SEND KKKK
@CASE GA+?
@SEND BRK+
Search dot pattern free signal until it is found
1
2
3
4
5
Station name (Example: LYNGBY RADIO)
Who are you?
Station identity exchange
Subscriber's telex number (in example, 802 is country
code of Hong Kong) for store-and-forward method
Location and name of file message
A: \ABC
Request for termination of message
1
2
3
4
5
Close Text
Save File?
(UNTITLED 1)
No
Yes
.MCR
File name (max.
12 characters in
conjunction with
identifier)
Extension name