5. DSC GENERAL MESSAGE CALLING, RECEIVING
5-15
3. Rotate the ENTER knob to select [SPECIAL MSG] then push the knob.
4. Rotate the ENTER knob to select [NEUTRAL MSG] then push the knob. [PRIOR-
ITY] is automatically selected to [URGENCY].
5. With [AREA CR] selected, push the ENTER knob.
6. Enter the area range referring to step 5 in paragraph 5.3.1.
7. With [COMM MODE] selected, push the ENTER knob.
8. Rotate the ENTER knob to select [TELEPHONE] or [NBDP-FEC] then push the
knob.
9. Rotate the ENTER knob to select [DSC FREQ] then push the knob.
10. Rotate the ENTER knob to select DSC frequency desired then push the knob. The
communication frequency changes in conjunction with DSC frequency. If you
change the communication frequency, go to step 11. If not, go to step 14.
11. Rotate the ENTER knob to select [COMM FREQ] then push the knob.
12. Rotate the ENTER knob to select [FREQUENCY] or [CHANNEL] then push the
knob.
13. Referring to "How to set working channel, frequency" on page 5-3, set the fre-
quency or channel.
14. Rotate the ENTER knob to select [GO TO CALL] then push the knob to send the
neutral craft call.
2187.5/ RX 2187.50 kHz
[SENDING]
ELAPSED TIME:
NEUTRAL MSG 00
H
00
M
04
S
AREA :
34
°
00 ’ N / 135
°
00 ’ E 0500NM
COMM MODE :
TELEPHONE
COMM FREQ :
TX 2182.0 /RX 2182.0
kHz
INFO PRINT
To Next Page
Loading...
