2
Touch control
Tap with finger
- Select a menu item.
- Select an object to display the
corresponding pop-up menu.
- Pan the charts.
- Scroll the menu.
Zoom in
Zoom out
or
Orientate 3D view.
Execute the function
which is selected in
[General] - [Function
Gesture] of the main
menu.
Switch between head up
and north up in the 2D/3D
modes.
Drag with finger
Pinch with two fingers
Drag with two fingers
Tap with two fingers
Rotate with two fingers
- The “” mark indicates a multi-
function soft control. Push the
RotoKey
TM
(or tap the menu) to go to
the next level.
- The “” mark indicates ON status
(selected). The “” mark disappears
with OFF status (deselected). Push
the RotoKey
TM
(or tap the menu) to
switch ON or OFF.
- There is no mark on a soft control
that does the function labeled on the
control. Push the RotoKey
TM
(or tap
the menu) to process the menu.
How to operate the menus
Home key
Select a menu.
Select an item then set.
Select an icon.
hi
Trac
n
Main menu
RotoKey
TM
Select a menu.
Additional
functions
Function
ON
Function
OFF
uto
ang
-scop
RotoKey menu
Select an object or position to
display the pop-up menu.
Select a menu.
Pop-up menu
Put one finger on the
boat icon then rotate
the other finger.
Put one finger on the
boat icon then rotate
the other finger.
Boat icon
New Point
Go To
New Route
Lat/Lon
◄
Orientation
Drag upward or
downward.
Switch from
2D to 3D.
- Zoom in or out the chart
scale in the 2D/3D modes
or weather display.
- Select radar range on the
radar display.
e
ault Route
olor
t
n
2
avigate with AutoPilot
TZTBB: Tap
the Home icon.
TZT9/TZT14:
TZT9/TZT14:
TZTBB: Tap
the screen.
Drag
Zoom in
Zoom out
For TZTBB:For TZTBB:For TZTBB:
For TZTBB:For TZTBB: