23
3. Select an appropriate port among COM1, COM2, COM3, COM4, COM5 and
COM6.
If you chose COM1, for example, do as follows.
4. Press the [ENT] key to display the COM1 setting window.
[SET COM1]
MODE : LONG RANGE
SPEED: IEC 61162-2
QUIT [MENU]
5. Press the [ENT] key again to display the MODE setting window.
[SET COM1]
MODE : LONG RANGE
SPEED: LONG RANGE
EXT DISPLAY
DISABLE
QUIT [MENU]
6. Press ▲ or ▼ to choose the device connected and press the [ENT] key.
LONG RANGE: Long range communication device, for ex. Inmarsat C.
EXT DISPLAY: External display, for ex. Radar, ECDIS, Pilotplug, etc.
DISABLE: When the port is not used.
7. Press the [ENT] key to display the SPEED setting window.
[SET COM1]
MODE : LONG RANGE
SPEED: IEC 61162-2
IEC 61162-1
IEC 61162-2
QUIT [MENU]
8. Press ▲ or ▼ to choose the data format, or data transmission rate.
IEC61162-1: 4800 bps
IEC61162-2: 38.4 Kbps
9. Press the [ENT] key.
10. Press the [MENU] key to save the settings.
11. Set up other ports similarly.
12. Set PC PORT similar to how you did for the COM PORT.
To Next Page
Loading...
