EasyManua.ls Logo

Furuno FA-100 - User Manual

Furuno FA-100
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
UAIS TRANSPONDER
FA-100

Other manuals for Furuno FA-100

Questions and Answers

  • D
    dorseyanthonyJul 26, 2025
    Why my Furuno Marine Radio cannot transmit or receive?
    • S
      simmonsshawnaJul 26, 2025
      If your Furuno Marine Radio cannot transmit or receive, first ensure that the VHF antenna cable is securely fastened. Then, check the VHF antenna itself for any damage or obstructions. If you're trying to send a TX message, try using a different TX channel by going to [MENU], [4], [1], [1].
  • J
    Jennifer FisherAug 2, 2025
    What to do if my Furuno Marine Radio shows no position data?
    • M
      matthewjenkinsAug 2, 2025
      If your Furuno Marine Radio displays 'No position data,' inspect the GPS antenna for any signs of damage. Additionally, verify that the GPS antenna cable and its connectors are securely connected and undamaged.
  • S
    Samuel BrownAug 9, 2025
    How to fix Furuno Marine Radio when it cannot turn on?
    • X
      xmcgeeAug 9, 2025
      If your Furuno Marine Radio won't turn on, make sure the power connector is firmly attached. Also, check the breaker (red button) on the rear of the transponder unit to see if it has popped out; if it has, identify the cause before resetting it. Finally, verify that the power supply is functioning correctly.
  • J
    Jonathan DiazAug 16, 2025
    What to do if Furuno Marine Radio sends message to wrong party?
    • E
      Edward JonesAug 17, 2025
      If your Furuno Marine Radio transmits messages to the wrong party, ensure that the ADDRESS TYPE is set to ADDRESS-CAST and that the MMSI is correct in the SET MSG TYPE sub-menu. This can be found by going to [MENU], [4], [1], [1] before sending a message.

Summary

Safety Instructions and Warnings

WARNING LABEL

Details about the warning label attached to the AC-DC power supply unit for safety.

Operating the FA-100 Transponder

Description of Controls

Identifies and explains the function of each control on the FA-100 transponder unit.

Setting Up for a Voyage

Guides users through essential initial settings for a voyage, including ship data and destination.

Setting CPA;TCPA

Configures the Closest Point of Approach (CPA) and Time to Closest Point of Approach (TCPA) for collision alarms.

Plotter Display

Details on how the plotter display shows AIS targets and how to interact with them.

Target Data Display

Instructions for viewing detailed information about identified targets on the AIS system.

FA-100 Maintenance and Troubleshooting

Troubleshooting

Common symptoms of trouble and their remedies for the FA-100 transponder.

Restoring Default Settings

Procedure to clear all settings and restore the FA-100 to its factory default configuration.

FA-100 Declaration of Conformity

Standards and Normative Documents

Lists the standards and normative documents to which the FA-100 product conforms.

Furuno FA-100 Specifications

General IconGeneral
BrandFuruno
ModelFA-100
CategoryMarine Radio
LanguageEnglish

Related product manuals