2 MAINTENANCE, TROUBLESHOOTING
33
2.5.6 GPS test
The GPS test checks the built-in GPS receiver for proper operation.
1. Press the [MENU] key to open the main menu.
2. Press the [7] key to open the DIAGNOSTICS sub-menu.
3. Press the [6] key to choose GPS TEST.
[GPS TEST]
START OF TEST
PUSH [ENT]
GPS TEST display
4. Press the [ENT] key to start the test. “NOW TESTING…” is displayed during
the testing and the results are displayed as shown in the illustration below.
SELF TEST1 shows OK for normal operation; NG (No Good) for abnormal
operation. SELF TEST shows “0” for normal operation; other numeric for
abnormal operation.
[GPS TEST]
PROGRAM No. : 4850218
PROGRAM Ver. : 0**
SELF TEST1 : OK
SELF TEST2 : 0
ERROR CONTENTS
** = Program Version No.
GPS test results
5. Press the [MENU] key to return to the DIAGNOSTICS sub-menu.
To Next Page
Loading...
