EasyManua.ls Logo

Furuno FA-100 - Own Dynamic Data

Furuno FA-100
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 OPERATION
17
1.9.2 Own dynamic data
The OWN DYNAMIC DATA display shows your ship’s dynamic data, which
includes time, date, ship’s position, course over ground (COG), speed over
ground (SOG), rate of turn (ROT), and heading.
The OOW should periodically check position, speed over ground and sensor
information.
1. Press the [MENU] key to open the menu.
2. Press the [3] key to choose OWN DATA.
3. Press the [2] key to choose OWN DYNAMIC DATA.
[OWN DYNAMIC DATA]
01/JAN/2002 13:24:55
LAT : 34
°
45.2132’ N
LON : 135
°
21.2345’ E
SOG : 8.1 kt
COG : 118.5 deg
ROT* : R10.3 deg/min
HDG : 120.7 deg
Date, time
Latitude
Longitude
Speed over ground
Course over ground
Rate of turn
Heading
Flashing when transmitting
* = If no ROT device is connected and HDG
sentence is input from a gyrocompass, etc.,
the following is displayed:
Rate of turn less than 10
°
/min.: 0.0
Rate of turn 10
°
/min. rightward or higher: R>10
Rate of turn 10
°
/min. leftward or higher: L>10
OWN DYNAMIC DATA display
4. Press the [MENU] key to close the display.

Other manuals for Furuno FA-100

Related product manuals