2 MAINTENANCE, TROUBLESHOOTING
38
2.10 Restoring Default Settings
You may clear all settings to start afresh with default settings. When this is
done, the default options for all items in the INIT SETTING and SYSTEM
SETTINGS sub-menus are restored. GPS data is also cleared; however, MMSI
and IMO numbers are not cleared.
1. Turn on the power while pressing and holding down the [CLR/ALM] key.
Hold down the [CLR/ALM] key until the “SHUT DOWN” screen below
appears.
SHUT DOWN
18/MAR/2002
12:12:11
Shut down screen
2. The equipment then starts restoring default settings, showing “COMPLETE”
when finished.
NOW STARTING . . .
CHECKING MENORY
COMPLETE
Screen after memory has been cleared
3. Press the [CLR/ALM] key. The plotter display appears.
4. Set items in INIT SETTINGS and SYSTEM SETTINGS, referring to Chapter
1.
To Next Page
Loading...
