NOTE: If your Apple device is using AirPlay 2 software, you
can connect to multiple stereos on the same network.
NOTE: You cannot stream the AirPlay source to other
stereos on the network using the Fusion PartyBus network
(Fusion PartyBus Networking, page 9). Using AirPlay 2
software, you can play content on multiple stereos on the
network, but the stereos must not be grouped.
NOTE: On some AirPlay devices, adjusting the volume on
the device affects the volume level on the stereo.
Setting an AirPlay Password
You can set a password that a user must enter when connecting
to the stereo using the AirPlay feature.
1
Select > SETTINGS > AirPlay PASSWORD.
2
Enter a password.
NOTE: The AirPlay password is case-sensitive.
When connecting to this stereo using the AirPlay feature, the
user must enter the password on their Apple device.
UPnP Playback
This stereo can play content from Universal Plug and Play
(UPnP) devices connected to the network, such as computers
and media servers. You must connect your UPnP device to the
same network as the stereo using a wired or wireless
connection, and you must configure the device to share media
over the network. See the owner's manual from your UPnP
device for more information.
After you have connected your UPnP device to the network and
configured it to share media, the UPnP source appears on the
source selection screen of each stereo on the network
(Selecting a Source, page 2).
Connecting a UPnP Device
You must connect your stereo to a network to play media from a
UPnP device, such as a NAS device.
1
Connect your UPnP device to the same network as the
stereo, referring to the instructions provided with your UPnP
device and router if necessary.
2
Select the UPnP source on the stereo (Selecting a Source,
page 2).
You can browse and play media from the UPnP device.
Connecting an Auxiliary Device
You can connect various auxiliary devices to the stereo. These
devices have either RCA connectors, a line output, or a
headphone output jack.
1
Locate the auxiliary connectors on the wiring harness.
2
If necessary, connect an RCA-to-3.5 mm adapter cable to the
auxiliary device.
3
Connect the auxiliary device to the AUX IN RCA connectors
on the wiring harness.
4
Select the Aux source.
Optical Audio Connection
You can connect devices with an optical audio output to the
stereo using an optical audio cable. Televisions, DVD players,
CD players, and other devices may supply digital optical audio
output.
This stereo supports PCM audio only. You may have to change
the settings on your device to output PCM audio.
NOTE: Because streaming audio over the Fusion PartyBus
network introduces a slight delay, streaming content from a
television or DVD player may not be ideal. You can disable
Optical as a streaming source in the settings, if needed (General
Settings, page 10).
SiriusXM Satellite Radio
Only SiriusXM brings you more of what you love to listen to, all
in one place. Get over 140 channels, including commercial-free
music plus the best sports, news, talk, comedy and
entertainment. Welcome to the world of satellite radio. A
SiriusXM Vehicle Tuner and subscription are required. For more
information, go to www.siriusxm.com.
Setting the Tuner Region for the SiriusXM
Source
You must set the stereo to use the USA tuner region before you
can listen to SiriusXM Satellite Radio.
1
Select > SETTINGS.
2
Select TUNER REGIONUSA.
Locating the SiriusXM Radio ID
You must have the radio ID of your SiriusXM Connect Tuner
before you can activate your SiriusXM subscription. You can
locate the SiriusXM Radio ID on the back of the SiriusXM
Connect Tuner or its packaging, or by tuning your stereo to
channel 0.
With the SiriusXM source selected, select > CHANNELS
> ALL CHANNELS > 000 RADIO ID.
The SiriusXM Radio ID does not include the letters I, O, S, or F.
Activating a SiriusXM Subscription
1
With the SiriusXM source selected, tune to channel 1.
You should be able to hear the preview channel. If not, check
the SiriusXM Connect Tuner and antenna installation and
connections, and try again.
2
Tune to channel 0 to locate the Radio ID.
3
Contact SiriusXM listener care by phone at (866) 635-2349 or
go to www.siriusxm.com/activatenow to subscribe in the
United States. Contact SiriusXM by phone at (877) 438-9677
or go to www.siriusxm.ca/activatexm to subscribe in Canada.
4
Provide the Radio ID.
The activation process usually takes 10 to 15 minutes, but
can take up to an hour. For the SiriusXM Connect Tuner to
receive the activation message, it must be turned on and
receiving the SiriusXM signal.
5
If the service is not activated within the hour, go to
http://care.siriusxm.com/refresh or contact SiriusXM Listener
Care by phone at 1-866-635-2349.
Selecting a Category
You can control which categories of channels are available
when using the CATEGORY tuning method.
1
With the SiriusXM source selected, select > CATEGORY.
2
Select a category.
Using Replay Mode
You can use Replay Mode to control playback of a SiriusXM
broadcast.
NOTE: The device enables Replay Mode automatically when
playing saved preset channels.
1
If necessary, hold to enable Replay Mode.
A progress bar appears at the bottom of the screen.
6 UPnP Playback
To Next Page
Loading...
Need help?
General
