What to do if my Fusion Car Video System says 'Check Tuner'?
To resolve a 'Check Tuner' message on your Fusion Car Video System, verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the stereo.
What to do if my Fusion Marine Equipment says 'No Signal'?
If your Fusion Marine Equipment displays a 'No Signal' message, it means the SiriusXM Connect Vehicle Tuner is struggling to receive the satellite signal. Here's what you can do: * Ensure the SiriusXM antenna is outdoors and has a clear view of the sky. * Make sure the antenna is securely mounted. * Remove any obstructions blocking the antenna's view. * Inspect the antenna cable for damage or kinks, and replace the antenna if the cable is damaged. Consult the SiriusXM Connect Vehicle Tuner installation instructions for further details on antenna installation.
How to fix 'Check Antenna' on Fusion Marine Equipment?
If your Fusion Marine Equipment says 'Check Antenna', it means that the antenna cable may be disconnected or damaged. To resolve this: * Verify the antenna cable is securely connected to the SiriusXM Connect Vehicle Tuner. * Inspect the antenna cable for any damage or kinks. If damaged, replace the antenna. SiriusXM products are available at your local car audio retailer, or at www.shop.siriusxm.com.
What to do if my Fusion Marine Equipment displays 'Check Tuner'?
If your Fusion Marine Equipment displays a 'Check Tuner' message, it indicates that the tuner may be disconnected or damaged. To fix this, verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the stereo.
How to clear 'Subscription Updated' message on Fusion Marine Equipment?
To clear the 'Subscription Updated' message on your Fusion Marine Equipment, simply select any button. For questions about your subscription, go to www.siriusxm.com or call 866-635-2349.
Details on physical controls for adjusting volume, switching zones, and navigating menus.
Pressing play/pause, skip track, rewind, and tuning controls for various audio sources.
Controlling volume for individual zones or all zones on the network.
Muting all connected stereos and adjusting the subwoofer level for each zone.
Setting up Digital Signal Processing profiles for optimized audio with Fusion speakers and amplifiers.
Configuring volume to automatically adjust based on the vessel's speed.
Connecting various media players via Bluetooth or USB for audio playback.
Pairing and controlling up to eight Bluetooth devices for music streaming.
Connecting and playing music from USB devices like flash drives and smartphones.
Listening to AM/FM radio, setting tuner regions, and connecting SiriusXM or DAB equipment.
Connecting Apple devices wirelessly via AirPlay and setting an optional password for security.
Introduction to SiriusXM service, requirements, and basic setup for reception.
Activating a SiriusXM subscription and locating the Radio ID for setup.
Limiting access to SiriusXM channels using parental controls and passcodes.
Resolving common SiriusXM advisories like antenna issues, tuner communication, and subscription problems.
Tuning and playing DAB stations, requiring a compatible module and region settings.
Connecting multiple Fusion stereos into a network for synchronized audio control across the vessel.
Creating, editing, and leaving groups within the Fusion PartyBus network for synchronized playback.
Resolving common issues with Bluetooth connectivity, song display, and network performance.
Addressing problems with Apple devices locking up, not being found, or AirPlay audio interruptions.
General| Power Output | 280W max |
|---|---|
| Digital Signal Processing | Yes |
| Fusion-Link Control | Yes |
| Amplifier | Class-D |
| NMEA 2000 | Yes |
| Display | Full-color LCD |
| Connectivity | Bluetooth, Wi-Fi |
| Audio Zones | 4 |
| Source Inputs | AM/FM, Bluetooth, USB, AUX |
| RMS Power | 200W |
| DAB+ | Ready |
| SiriusXM | Ready |
| Water Resistance | IPX7 front panel |
To Next Page
