General Settings
NOTE: When the stereo is in a group, you cannot change settings on that stereo.
Select > SETTINGS.
NOTE: When a check box is filled, the option is on. When the check box is clear, the option is off.
DEVICE NAME: Sets a name for this device.
LANGUAGE: Sets the language on the device.
TUNER REGION: Sets the region used by the FM and AM sources.
This setting is also needed to configure DAB and SiriusXM sources
TELEMUTE: Sets the behavior of the mute function when the device is connected to a hands-free mobile phone
using the TELEMUTE wire on the wiring harness . When a call is received, the device can either mute the
audio or broadcast the call through the Aux1 input. See your hands-free kit instructions.
NOTE: This setting does not affect a phone connected to the stereo using Bluetooth technology.
POWER OPTIONS: Adjusts power settings, such as the power-save mode (Power Options, page 27).
SEARCHING: Enables Fusion Alpha Search Technology (FAST), which allows you to quickly search for tracks
by letter or number. You can select a number to enable the FAST menu if your music device contains more
than the selected number of items.
ZONE: Enables you to configure the speaker zones (Speaker Zone Settings, page 24).
SOURCE: Allows you to enable, disable, and name the sources on the stereo (Source Settings, page 28).
NETWORK: Enables you to configure the Fusion PartyBus network settings (Network Settings, page 28).
UPDATE: Updates the stereo or connected devices (Update Options, page 32).
ABOUT: Shows the software version information for the stereo.
Speaker Zone Settings
Disabling the Internal Amplifier
If you do not connect speakers directly to zones 1 and 2, you can disable the internal amplifier to reduce power
consumption.
1 Select > SETTINGS.
2 Select ZONE.
3 Select INTERNAL AMP ON to clear the check box.
Setting the Home Zone
The home zone is the speaker zone that you adjust by default when you turn the dial.
1 Select > SETTINGS.
2 Select ZONE > ASSIGN HOME ZONE.
3 Select a zone.
Synchronizing the Source and Zone Volume Levels
You can synchronize the volume levels on one or all zones with some source devices, such as a Bluetooth,
AirPlay, or UPnP source.
1 Select > SETTINGS.
2 Select ZONE > PHONE VOLUME SYNC.
3 Select a zone or ALL.
When you adjust the volume on the connected source, the volume on the selected zone is also adjusted.
24 General Settings
To Next Page
Loading...
Need help?
General
