Appendix
Registering Your Fusion Device
Help us better support you by completing our online registration today.
• Go to garmin.com/account/register/.
• Keep the original sales receipt, or a photocopy, in a safe place.
Cleaning the Device
1 Dampen a soft, clean, lint-free cloth with fresh water.
2 Gently wipe the device.
Software Updates
For best results, you should update the software in all Fusion devices regularly.
You can update the software using the Fusion-Link remote control app on your compatible Apple or Android
device, or using a USB flash drive.
Updating the Software Using a USB Flash Drive
You can update the device software using a USB flash drive.
NOTICE
Do not turn off the device or disconnect the power during a software update. Turning off the power during a
software update may cause the device to become unresponsive.
NOTE:
• You cannot update the software using a USB flash drive formatted using the NTFS file system. If you
encounter problems updating the device, format the USB flash drive using FAT32 and try the update process
again.
• The device may restart a few times while updating the software. This is expected behavior.
• You can program only newer versions of software on the device.
1 Go to the page for your device on support.garmin.com, and download the update file.
2 Extract the contents of the .zip file to the root of your USB storage device.
The contents of the software update are contained in a folder named Garmin.
3 Insert the USB storage device into the USB port of the stereo.
4 Select > SETTINGS.
5 Select UPDATE > STEREO > YES.
Appendix 35
To Next Page
Loading...
Need help?
General
