Fusion Apollo RA770 - User Manual

Other manuals for Fusion Apollo RA770

Installation Instructions8 pages

Quick Start Manual88 pages

Questions and Answers

T
Tammie RichardsAug 3, 2025
What to do if my Fusion Marine Equipment has no signal?
- F
  Francisco LynchAug 3, 2025
  If your Fusion Marine Equipment shows 'No Signal', it means the SiriusXM Connect Vehicle Tuner isn't getting a good satellite signal. Here's what you can do: * Make sure the SiriusXM antenna is outside with a clear view of the sky. * Confirm the antenna is securely mounted. * Remove any obstructions around the antenna. * Check the antenna cable for damage or kinks. If damaged, replace the antenna. You can find SiriusXM products at car audio retailers or at www.shop.siriusxm.com. Consult the SiriusXM Connect Vehicle Tuner installation instructions for further details on antenna installation.
L
Larry LindseyAug 8, 2025
How to fix 'Check Antenna' on Fusion Marine Equipment?
- J
  Joshua SmithAug 8, 2025
  If your Fusion Marine Equipment displays a 'Check Antenna' message, it indicates a problem with the antenna connection. First, verify that the antenna cable is properly connected to the SiriusXM Connect Vehicle Tuner. Then, inspect the antenna cable for any signs of damage or kinks. If you find damage, you should replace the antenna. SiriusXM products are available at your local car audio retailer, or at www.shop.siriusxm.com.
W
William AtkinsAug 14, 2025
What to do if my Fusion Marine Equipment displays 'Check Tuner'?
- D
  Daniel KlineAug 14, 2025
  If your Fusion Marine Equipment displays 'Check Tuner', it means the tuner connection might be faulty. Make sure the SiriusXM Connect Vehicle Tuner cable is securely connected to the stereo.
M
Marisa SanchezAug 20, 2025
What to do if my Fusion Marine Equipment displays 'Subscription Updated'?
- B
  briannabuckleyAug 21, 2025
  If your Fusion Marine Equipment displays 'Subscription Updated', select any button to clear the message.
A
Amber BergOct 26, 2025
What to do if I cannot see or connect to Fusion Apollo RA770 Marine Equipment PartyBus devices on the network?
- J
  James MoodyOct 26, 2025
  If you're having trouble seeing or connecting to Fusion PartyBus devices on your network, here are a few things to check: * Ensure that only one device (either the stereo or a router) is configured as a DHCP server. * Confirm that all Fusion PartyBus devices, network switches, routers, and wireless access points are connected and powered on. * For wireless devices, verify they are connected to a wireless router or access point. * Try changing the channel on your router or access point to address potential interference. * Disconnect Bluetooth devices to rule out interference. * Make sure each device has a unique IP address, the first three sets of numbers in the IP addresses match, and the subnet masks are identical on every device. * As a last resort, reset all network setti...

Summary

Stereo Controls

Source Selection

Media Player Connection Guide

Audio Control Features

Volume Adjustment

How to adjust audio volume levels for different zones.

DSP Settings

Configure DSP Settings

Optimizing audio settings using the FUSION-Link remote control app.

Bluetooth Device Playback

Connect Bluetooth Device

Pairing and connecting a Bluetooth device for audio playback.

SiriusXM Satellite Radio

Enable SiriusXM Source

Parental Controls

Unlock Parental Controls

Accessing locked SiriusXM channels by entering a passcode.

Lock SiriusXM Channels

Change Parental Passcode

General Settings

Speaker Zone Configuration

Configuring individual speaker zones for audio control.

Network Configuration Settings

Settings for connecting the stereo to a network.

Speaker Zone Settings

Set Zone Name

Network Configuration

DHCP Server Setup

Configuring the stereo as a DHCP server for network devices.

Wireless Access Point Setup

Setting up the stereo as a Wi-Fi access point for wireless connectivity.

Connecting to Wireless Access Point

Connecting the stereo to an existing wireless network.

Troubleshooting

Stereo Unresponsive

Steps to resolve issues when the stereo does not respond to key presses.

Bluetooth Audio Issues

Network Troubleshooting

Network Status Icons

Fusion Apollo RA770 Specifications

General

Display Type	Color LCD
Connectivity	Bluetooth, Wi-Fi, Ethernet
Audio Zones	4
Voltage	12V DC
Tuner	AM/FM
Inputs	USB, AUX
Water Resistance	IPX7
Digital Signal Processing (DSP)	Yes
NMEA 2000	Yes
SiriusXM	Ready
Line Out	Yes
Subwoofer Out	Yes
Amplifier	Class D
DAB+	Yes
Display Size	4.3 inches
RMS Power	25W x 4