TIP: To adjust the subwoofer level,
you can press and hold the dial to
select the SUB LEVEL tab, and turn
the dial to adjust the subwoofer level.
Media Player Connection
Connecting a Compatible Bluetooth
Device
You can play media from a compatible
Bluetooth device using the Bluetooth
wireless connection.
You can control the music playback with
the media app on a Bluetooth device or
using the FUSION-Link
™
remote control
app.
1
Select the BT source.
2
Select > DISCOVERABLE to
make the stereo visible to your
compatible Bluetooth device.
3
Enable Bluetooth on your compatible
Bluetooth device.
4
Bring the compatible Bluetooth device
within 10 m (33 ft.) of the stereo.
5
On your compatible Bluetooth device,
search for Bluetooth devices.
6
On your compatible Bluetooth device,
select the stereo from the list of
detected devices.
7
On your compatible Bluetooth device,
follow the on-screen instructions to
pair and connect to the discovered
stereo.
When pairing, your compatible
Bluetooth device may ask you to
confirm a code on the stereo. The
stereo does not display a code, but it
does connect correctly when you
confirm the message on the Bluetooth
device.
8
If your compatible Bluetooth device
does not immediately connect to the
stereo, repeat steps 1 through 7.
The DISCOVERABLE setting is disabled
automatically after two minutes.
Connecting an Apple
®
Device Using
AirPlay
®
1
From the settings menu on your Apple
device, connect to the same wireless
network as your compatible FUSION
®
stereo.
NOTE: You can connect some Apple
devices to the network using a wired
Ethernet connection, if applicable. Go
to the Apple website for more
information.
4 Quick Start Manual
To Next Page
Loading...
