Fusion Powerplant PP-AM8004

POWERPLANT
AMPLIFIER MODELS
PP–AM10001, PP–AM15001, PP–AM20001, PP–AM4002
PP–AM9002, PP–AM12002, PP–AM8004, PP–AM16004

Fusion Powerplant PP-AM8004 Specifications

General

Brand	Fusion
Model	Powerplant PP-AM8004
Category	Amplifier
Language	English

Summary

PowerPlant Amplifier Introduction

Amplifier Features Overview

Amplifier Specifications Table

Amplifier Power Ratings

Installation Guidelines

Mounting and Airflow Requirements

Subwoofer Enclosure Mounting Warning

Installation Safety Warnings

Pre-Installation Safety Checks

Disconnect battery, check vehicle lines, secure product, and protect wiring before installation.

Wiring Best Practices

Power and Ground Wire Gauge Selection

Connection Procedures

Amplifier Power Connection

Connect +12V directly to battery with inline fuse/breaker; avoid engine components.

Amplifier Ground Connection

Connect to clean metal chassis point using same gauge cable as power for optimal ground.

Remote Turn-On and Speaker Wiring

Remote Turn-On Wire Installation

Speaker Load and Wiring Guide

Low Level Inputs and Level Control

RCA Interconnects and Noise Reduction

Setting Input Gain Correctly

Adjust amplifier level to match head unit output without audible distortion.

Monoblock Amplifier Control Descriptions

Control Descriptions and Connections

Input, Output, and Filters

Power, Ground, and Remote Terminals

Connect power to battery, ground to chassis, and remote to switched +12V.

Fuses and Speaker Output Terminal