12
NOTE
When searching for Album, Artist, Song etc, rotate the Encoder
Volume Control clockwise to search from A-Z or anti-clockwise
for Z-A search.
RANDOM PLAY
Press RDM to cycle between the following modes:
RDM FLD – Plays the current album randomly.
RDM ALL – Plays the whole iPod/iPhone library randomly.
RDM OFF – Turns the Random function off.
iPod/iPhone MASTER CONTROL MODE
Press the button to switch between the two
control options
• Unit control mode: Use the head unit controls to
select Track/Artist/Album/Playlist etc. This is the Default
setting.
• iPod/iPhone control mode: Use the iPod/iPhone to
select the Artist/Album/Track etc.
This mode is useful if you need to sort through a large
amount of Tracks/Albums etc.
NOTE
Please ensure the iPod/iPhone cable is connected correctly to
the USB port and only use an original iPod / iPhone data sync
cable.
BLUETOOTH A2DP STREAMING
OPERATION
You can listen to music from an A2DP Bluetooth enabled
device on the RV-CD850BT.
PAIRING A BLUETOOTH DEVICE
7iViVÌ}>ÕiÌÌ`iÛVivÀÌiwÀÃÌ Ìi]
you will need to pair the device with the unit.
For most devices, pairing only needs to be done once.
Please follow these steps:
1. Ensure Bluetooth is enabled on the phone to be
connected to the unit.
2. Search for a new Bluetooth device on the phone (this
may take up to 30 seconds)
3. Select “FUSION” on the Bluetooth device list.
4. Some devices may require you to enter a PIN. If
prompted, enter “0000” for the PIN.
5. [PAIRING OK] will be displayed on the LCD display if
pairing is successful. The paired device will then connect
to the RV-CD850BT automatically.
Note on some phones, you may need to select “SET AS
AUTHORISED” or similar to ensure the RV-CD850BT will
automatically pair on subsequent usage.
To Next Page
Loading...
Need help?
General
