11
iPod/iPhone OPERATION
This unit is equipped with iPod/iPhone control which
allows you to directly control and charge iPod/iPhones
using the units controls – with display of iPod/iPhone
track information appearing on the unit’s LCD display.
Please read below for more detailed operation.
CONNECTING AN iPod OR iPhone
Insert the iPod/iPhone data sync cable to the Front USB
as shown and the unit will start playing the iPod/iPhone
automatically.
Apple sync cable
(not supplied)
BASIC SEARCH – PLAYLIST/ARTIST/ALBUM/SONG on iPod/iPhone
Press BAND to browse the iPod/iPhone menu.
Then rotate the Encoder Volume Control clockwise to and
press ENTER to choose one of the following selections,
then follow the steps below:
PLAYLIST Rotate the Encoder Volume control to select your
desired Playlist and press ENTER to start play.
ARTIST Rotate the Encoder Volume Control to select your
desired Artist then press ENTER. Rotate the Encoder
Volume Control to then select an Album & press ENTER.
Rotate the Encoder Volume Control again to select a
song within the selected Album.
ALBUM Rotate the Encoder Volume Control to select
your desired Album and press ENTER to select it. Then
ÀÌ>ÌiÌi V`iÀ6ÕiÌÀÌ ÃiiVÌ> ëiVwV
song within the selected Album.
SEARCH FOR FURTHER CONTENT on iPod/iPhone
In addition to the PLAYLIST/ARTIST/ALBUM seach
vÕVÌÃ]ÌiÀi>Ài>Ã>``Ì>wi`ÃÞÕV>Ãi>ÀV
ÞÕÀ*`À*iqÌivÕÃÌvwi`ÃÃ>ÃvÜÃ\
PLAYLIST / ARTIST / ALBUM / SONG / GENRE / COMPOSER / AUDIOBOOK / PODCAST
1. Rotate the Encoder Volume knob to select the desired
Ãi>ÀVwi`]Ìi«ÀiÃÃ /,ÌVwÀ°
2. Rotate the Encoder Volume knob to select the desired
ÃiiVÌÜÌÌiwi`Ìi]«ÀiÃÃ /,ÌVwÀ°
To Next Page
Loading...
Need help?
General
