Fusion Signature Series User Manual

Specifications
12V Models
VRated power output
4 Ohm: 100 W RMS x 6 @ 14.4 Vdc input < 1%
THD+N (EIA/CEA-490A)
2 Ohm: 140 W RMS x 6 @ 14.4 Vdc input < 1%
THD+N (EIA/CEA-490A)
4 Ohm bridged: 280 W RMS x 3 @ 14.4 Vdc input < 1%
THD+N (EIA/CEA-490A)
Input sensitivity 0.3 Vdc to 8 Vdc RMS, adjustable
Operating voltage 10.8 to 16 Vdc
Current draw (@14.4 Vdc input)
Standby: less than 1 mA
Idle: less than 2.5 A
Max: 75 A
Fuse rating
3 @ 40 A ATC blade-type (SAE J1171 compliant)
NOTICE
To maintain ignition protection compliance in accordance with SAE J1171, replace
only with J1171 fuses, such as a Bussmann ATC-40. Using non-compliant fuses
may damage the amplifier and voids your warranty.
24V Models
Rated power output
4 Ohm: 100 W RMS x 6 @ 28.8 Vdc input < 1%
THD+N (EIA/CEA-490A)
2 Ohm: 140 W RMS x 6 @ 28.8 Vdc input < 1%
THD+N (EIA/CEA-490A)
4 Ohm bridged: 280 W RMS x 3 @ 28.8 Vdc input <
1% THD+N (EIA/CEA-490A)
Input sensitivity 0.3 Vdc to 6 Vdc RMS, adjustable
Operating voltage 21.6 to 32 Vdc
Current draw (@28.8 Vdc input)
Standby: less than 1 mA
Idle: less than 1.25 A
Max: 35 A
Fuse rating
3 @ 20 A ATC blade-type (SAE J1171 compliant)
NOTICE
To maintain ignition protection compliance in accordance with SAE J1171, replace
only with J1171 fuses. Using non-compliant fuses may damage the amplifier and
voids your warranty.
All Models

Fusion Signature Series Specifications

General

Impedance	4 Ohms
Sensitivity (dB)	90 dB
Speaker Size	6.5 inches
Woofer Size	6.5 inches
Tweeter Size	1 inch