7
charge the battery, connect the microUSB plug to the socket in the
device and the USB plug to the charger.
Incorrect charger connection (USB cable) can cause damage to the
AC adapter or the device. The damages resulting from improper handling
are not covered by the warranty.
Plug the charger into the wall socket. Once you start charging, an icon of
the battery situated in the upper right corner will change to an animated
symbol of lightning. If the device is turned off an animation depicting the
level of battery charge should appear.
The device can heat up during charging. It is a regular occurrence
and should not affect the stability or performance of the device.
When the charge reaches 100% it means that the battery is fully charged,
finish the charging. Unplug the charger from the from the wall socket and
from the device.
If the device does not charge properly deliver it with the charger to a
service center of the manufacturer.
8. Buttons
Menu
• Pressing it will cause the list of open apps to appear, where you can
switch in-between or turn them off.
• Double quick press switches on the previously used application.
Home
• One quick press takes you to device desktop.
• Longer press and release will turn on the Google search engine and
access Google Now™ function.
Back
• Pressing <Back> will cause exit from the application / return to the
previous screen.
Blockade on/off button
• One quick press locks/unlocks the screen.
• Pressing the button for about 2 sec. will cause:
O If the device is off - the device will switch on,
O If the device is on - displaying menu allowing you to shutdown,
reboot,enable / disable airplane mode, enable lock, displaying system
settings.
• You can also cause a hard reset by pressing and holding the
button until the device resets.
Volume increase and decrease buttons
•
Pressing during a voice call will cause an increase or decrease of
the audio connection volume.
• Pressing the button while an incoming call mutes the ringtone.
• Pressing the button when no calls are active will decrease or
increase the volume of the ringtone, change sound profile on
"vibration only" or "alarms only".
• Pressing the button while camera app is open might start the shutter
and take a picture. (Works only if the software provides the function).
To Next Page
Loading...
