FUTABA 10CAG - Channel 3 S Function Selection ( CONDITIONFUNCTION )

88
GOAL of EXAMPLE: STEPS: INPUTS:
Activate
BUTTERFLY
.
Adjust the aileron and flap travel to
75%
.
Elevator settings are adjustable in the
B.FLY-ELE
.
Mix switch is selectable.
Open the
BUTTERFLY
function.
for 1 second.
(If
BASIC
, again.)
C
to
BUTTERFLY
.
Activate the function.
SWITCH A in up position.
C
to
MIX
to
OFF
.
Adjust the travels as needed.
(Ex: Ailerons each
75%
, Flap
75%
.)
C
to
AIL1
to
75%
.
C
to
FLAP
to
75%
.
C
to
AIL2
to
75%
.
Close menu.
Where next? View additional model setups on the internet: www.futaba-rc.com\faq\
Channel 3's function selection (
CONDITION/FUNCTION
):
Channnel 3's function is selectable in the
ARBK-FUNC
item. (Throttle stick, switches, or knobs)
By selecting anything other than
STK
, channel 3's function may be separated from
BUTTERFLY's
function, so channel 3 can
be used for other functions.
Adjustability:
•
Channel 3's function:
STK
: THROTTLE STICK
Sw-A
to
H
: SWITCH A to H
Vr-A
to
Vr-E
: KNOB A to E