FUTABA 6EXAP User Manual

INSTRUCTION MANUAL
INSTRUCTION MANUAL
for Futaba 6EXAP
for Futaba 6EXAP
6-channel,
PCM/PPM(FM) selectable
Radio control system for aircraft
Futaba Corporation
Technical updates available at:
http://www.futaba-rc.com
Entire Contents © Copyright 2005
FUTZ8563 V1.0
1M23N12007

FUTABA 6EXAP Specifications

General

Brand	FUTABA
Model	6EXAP
Category	Remote Control
Language	English

Summary

Radio and Servo Installation Guide

Receiver and Servo Connection Diagram

LCD Display and Programming Controls

6EXAP Radio Programming Mode

Model Memory Management

Stores data for multiple models, enabling quick selection and preventing errors.

Transmitter Battery Voltage Monitoring

Displays battery level, with warnings for low voltage to ensure safe operation.

Model Selection and Data Management

Model Select Function

Allows selection and management of up to six different model memories.

Data Reset Function

Modulation Select Function (PPM/PCM)

Model Naming Function

Servo Reversing and Dual Rates

Servo Reversing Function

Adjusts servo direction of response to match control inputs for correct model operation.

Dual Rate Settings

Allows switching between two different control throws for Aileron, Elevator, and Rudder.

Exponential and End Point Adjustments

Exponential Settings

Modifies servo response curve, softening initial stick movements for smoother control.

End Point Adjustment (EPA)

Trim Settings and Programmable Mixer

Trim Settings

Programmable Mixer (PMIX)

Wing Mixing Type Selection

Flaperon Mixing

Flap Trim Function

Flap Trim Activation

V-Tail Mixing Function

V-Tail Mixing Setup

Elevon Mixing Function

Elevon Mixing Setup

Fail Safe Function

Fail Safe Setup (PCM)

Prescribes servo positions upon loss of radio signal to ensure safer operation.

Radio Control Flying Safety

Control Check Before Flight

Radio Range Check Procedure