54
<Functions of System Menu>
1. Turn ON the transmitter, activating the Model
Select screen. If Model (MDL) has been
selected, please be sure to press the Model
(MDL) sensor when powering up the transmitter.
*Please note: Even if the Model Select function is active, the
Power Mode screen will appear when the transmitter is turned
ON while simultaneously pressing the Return (RTN) button.
2. The SensorTouch is used to select amongst the
on-screen models. The most recently used
model memory will automatically highlighted
when the transmitter is turned ON. To select
this memory, press the Return (RTN) button. If a
different model is desired, use the SensorTouch
to scroll through the available options; each
highlighted accordingly. Again, to select
a model, press the Return (RTN) button
accordingly. The T8FGS offers an audible and
visual confirmation as the selected model
memory is changed.
To Next Page
Loading...
