75
<Functions of Linkage Menu>
Subtrim setting procedure
Subtrim can be set at the last page of the swash
setting screen.
*The sub-trim value set here is reflected at sub-trim of the
linkage menu.
Pitch adjustment procedure
The pitch adjustment function can be used at the
last page of the swash setting screen.
1. Call the last page of the swash setting
screen.
2. When the cursor is moved to a pitch
adjustment button and the RTN button is
touched, the corresponding pitch is output.
* In the pitch adjustment mode an * is displayed at the left
side of the current output setting button.
*If the cursor is moved to another button and the RTN
button is touched during pitch adjustment output the pitch
adjustment mode is deactivated.
Function details are as follows:
Button Function
High High pitch xed output mode
Neutral Neutral pitch xed output mode
Low Low pitch xed output mode
Moving Cyclic pitch output mode
*The cyclic pitch speed can be set with the button at the right
side of the “Moving” button.
Setting range: 1 to 100
*When the set value is large, motion becomes fast and when
the set value is small, motion becomes slow.
To Next Page
Loading...
