TABLE OF CONTENTS
I. Equipment Selection. Answering Common Questions
A. Channels/Frequencies and Frequency Bands
B. Modules/Receivers/Accessories and Synthesized Equipment
C. Modulation, FailSafe and Resolution (512 vs 1024)
D. Batteries: Charging and Cycling
E. Training Equipment and Functions
II. Programming Specifics
A. Selecting the Correct Model Type 2-1
B. Understanding Servo Travel vs. Function Travel (Multiple Rates) 2-2
C. Multiple Servos for One Control Type and Other Set-up Options 2-4
D. P-Mix Features 2-8
E. Understanding the Basics of Conditions 2-10
F. Specific Programming Examples 2-12
III. Glossary of Terms, Keystroke Commands, and Primary Manual Page References
1-1
1-3
1-6
1-9
1-10
To Next Page
Loading...