___
Press A then P to select switch A and turn the mix on in the lowest position of the
switch
___Press N three times to exit the Pmix.
&25'
&25'&25'
&25'--
K'*'
/C'
F) 0!E3!""*+)
,FE!
"*
Create a new condition and assign it to the third switch position. In part 3, select switch A
and press P to assign the condition to the 3rd position of this switch. In part 4, name the
new condition "trple" for triple rate.
;F6!**"*'
!"'"'
'
(K0!*D()DF<(ED)D()"
*+!"
>
@*
*)@
,
___From home, press O for Condition
___Press B then G to open AFR
___Press B then F to select elevator
___
Press C then I to set up elev to 20% (ONLY WHEN switch A is in its lowest
position).
___Press D then I to set down elev to 20%.
___Press End.
To Next Page
Loading...
