TM2
O D J
see TM1.
TMR: Timer. Abbreviation for timer used on timer displays.
Trainer: See TRN.
Trim follow: Trim combine/separate feature of trim menu. Allows trim adjustments in
one condition to affect or not affect other conditions. Trim option in mixes: See PMX.
Trim menu: See TRM.
Trim mix (for thermal hunting): See TM1.
Trim offset: See TOF.
Trim option in mixes: See PMX.
Triple rate: 3rd control travel setting available in flight. See D/R.
T/R: Elapsed
TRM: Trim menu. Used to memorize current digital trim positions, set trim type (see
ATL and NOR), % of trim delay when switching from condition to condition, sound on
or off when trimmers used, rate of trim response at 2 different lengths of time held, and
having trims affect all conditions or only the current condition. For example, store trim
positions to memory once model is perfectly trimmed. Adjust CG and re-fly, re-trim.
Amount of trim change caused by adjustment to aircraft is now easily measured. To
activate additional features of trim menu, select the specific trimmer, T1-T4, and adjust
as desired. Manual P. 71. Home E.
TRN: Trainer system. Controls channels and features provided to student. Manual P.29.
Q B H.
Twin elevator servos: See ALV.
Twin aileron servos: See FPN and ADF.
TYP
P C H
Model type. Select basic programming for the selected model: airplane,
glider (2, 4 or 5 servos), or helicopter. All model settings are lost if the
model type is changed. Manual P. 49.
UNA
Q C H
UNA:User Name. Enter user’s name and security code. Manual P. 34.
User name: See UNA.
Variable Pitch Prop Control: See CPT.
VLT
Q B G
Voltmeter, voltage reading. Displays transmitter voltage and receiver
voltage through the DSC cord (including adjustable load.) Visible on home
screen if Timer 2 display is turned off in TIM screen. Manual P.41. Can also
be accessed from Home I.
To Next Page
Loading...
