FUTABA FX-20 User Manual

FX-20-2.4G
Futaba Corporation
9
7.
7.7.
7.Linkage menu
Linkage menuLinkage menu
Linkage menu
The linkage menu sets the primary data of the each model. These data are common to every
flight condition.
If you touch “LNK” of the touch sensor over 1 second, you can get into the linkage menu screen.
8.
8.8.
8.Model Menu
Model MenuModel Menu
Model Menu
The model menu sets the data of mixer. These data of each flight condition can be set.
If you touch “MDL” of the touch sensor over 1 second, you can get into model menu screen.
9.
9.9.
9.System Menu
System MenuSystem Menu
System Menu
The system menu sets the transmitter setting data. For example, display contrast, stick mode.
If you touch “SYS” of the touch sensor over 1 second, you can get into system menu screen

FUTABA FX-20 Specifications

General

Brand	FUTABA
Model	FX-20
Category	Remote Control
Language	English